Mechanical & Manufacturing Engineering with Foundation Year
Entry requirements
UCAS Tariff
Grades are important; however, our offers are not solely based on academic results. We are interested in creative people that demonstrate a strong commitment to their chosen subject area and therefore we welcome applications from individuals from a wide range of backgrounds. To assess student suitability for their chosen course we normally arrange interviews for all applicants at which your skills, achievements and life experience will be considered as well as your qualifications.
You may also need to…
Attend an interview
About this course
**UWTSD ranked 1st in the UK for student satisfaction in Manufacturing & Production Engineering – Complete University Guide 2023**
Mechanical and manufacturing engineering is intended to provide a thorough grounding in mechanical engineering science and its application in design and the solution of a range of engineering problems. In addition, students will develop knowledge in a suitable range of manufacturing processes and materials. The programme will also consider environmental aspects of design and technology and will enable students to gain a range of skills, relevant to a broad range of employment opportunities.
Modules
Foundation Year (Cert HE STEM)
The foundation year is designed to develop your mathematical, analytical and study skills, to equip you with the necessary academic skills required to successfully study engineering at a degree level.
• Academic Skills (20 credits; compulsory)
• Further Mathematics (20 credits; compulsory)
• Further Science for Engineering (20 credits; compulsory)
• Integrating Project (20 credits; compulsory)
• Introduction to Mathematics and Science (20 credits; compulsory)
• Manufacturing and Materials (20 credits; compulsory).
Year One – Level 4 (HNC, HND & BEng)
• Electrical and Electronic Principles (20 credits; compulsory)
• Engineering Applications and Study Skills (20 credits; component pass)
• Engineering Design (20 credits; compulsory)
• Engineering Mathematics (20 credits; compulsory)
• Engineering Science (20 credits; compulsory)
• Materials and Introduction to Processing (20 credits; compulsory).
Year Two – Level 5 (HND & BEng)
• Group Project (20 credits; component pass)
• Management, Innovation and Sustainability (20 credits; component pass)
• Manufacturing Design and Technology (20 credits; core)
• Six Sigma Green Belt (20 credits; compulsory)
• Stress Analysis and Dynamics (20 credits; compulsory)
• Thermofluids and Control (20 credits; compulsory).
Year Three – Level 6 (BEng)
• Advanced Processes and Materials (20 credits; component pass)
• Computational Methods (20 credits; component pass)
• Independent Project (40 credits; compulsory; Graduate Attributes Framework module)
• Plant and Asset Engineering (20 credits; compulsory)
• Structural and Fluid Analysis (20 credits; compulsory).
Assessment methods
The course is assessed by a mixture of coursework, phase tests, presentations, vivas and examinations. Students are given the opportunity to undertake engineering projects in teams and as individuals, applying the content covered within the modules.
Tuition fees
Select where you currently live to see what you'll pay:
The Uni
SA1 Waterfront Campus, Swansea
Engineering
What students say
We've crunched the numbers to see if overall student satisfaction here is high, medium or low compared to students studying this subject(s) at other universities.
How do students rate their degree experience?
The stats below relate to the general subject area/s at this university, not this specific course. We show this where there isn’t enough data about the course, or where this is the most detailed info available to us.
Production and manufacturing engineering
Teaching and learning
Assessment and feedback
Resources and organisation
Student voice
Who studies this subject and how do they get on?
Most popular A-Levels studied (and grade achieved)
After graduation
The stats in this section relate to the general subject area/s at this university – not this specific course. We show this where there isn't enough data about the course, or where this is the most detailed info available to us.
Production and manufacturing engineering
What are graduates doing after six months?
This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.
Top job areas of graduates
Graduates are in significant demand, so unemployment rates are well below the national graduate average and starting salaries are well above average. Much the most common industries for these graduates are now vehicle manufacture - there are not enough people with these degrees to go round and so the big employers tend to take the lion's share at the moment. But pretty much anywhere there is manufacturing, there are production engineers. Bear in mind that a lot of courses are four years long, and lead to an MEng qualification — this is necessary if you want to become a Chartered Engineer.
What about your long term prospects?
Looking further ahead, below is a rough guide for what graduates went on to earn.
Production and manufacturing engineering
The graph shows median earnings of graduates who achieved a degree in this subject area one, three and five years after graduating from here.
£29k
£33k
£34k
Note: this data only looks at employees (and not those who are self-employed or also studying) and covers a broad sample of graduates and the various paths they've taken, which might not always be a direct result of their degree.
Explore these similar courses...
This is what the university has told Ucas about the criteria they expect applicants to satisfy; some may be compulsory, others may be preferable.
Have a question about this info? Learn more here
This is the percentage of applicants to this course who received an offer last year, through Ucas.
Have a question about this info? Learn more here
This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.
Have a question about this info? Learn more here
Course location and department:
This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.
Have a question about this info? Learn more here
Teaching Excellence Framework (TEF):
We've received this information from the Department for Education, via Ucas. This is how the university as a whole has been rated for its quality of teaching: gold silver or bronze. Note, not all universities have taken part in the TEF.
Have a question about this info? Learn more here
This information comes from the National Student Survey, an annual student survey of final-year students. You can use this to see how satisfied students studying this subject area at this university, are (not the individual course).
This is the percentage of final-year students at this university who were "definitely" or "mostly" satisfied with their course. We've analysed this figure against other universities so you can see whether this is high, medium or low.
Have a question about this info? Learn more here
This information is from the Higher Education Statistics Agency (HESA), for undergraduate students only.
You can use this to get an idea of who you might share a lecture with and how they progressed in this subject, here. It's also worth comparing typical A-level subjects and grades students achieved with the current course entry requirements; similarities or differences here could indicate how flexible (or not) a university might be.
Have a question about this info? Learn more here
Post-six month graduation stats:
This is from the Destinations of Leavers from Higher Education Survey, based on responses from graduates who studied the same subject area here.
It offers a snapshot of what grads went on to do six months later, what they were earning on average, and whether they felt their degree helped them obtain a 'graduate role'. We calculate a mean rating to indicate if this is high, medium or low compared to other universities.
Have a question about this info? Learn more here
Graduate field commentary:
The Higher Education Careers Services Unit have provided some further context for all graduates in this subject area, including details that numbers alone might not show
Have a question about this info? Learn more here
The Longitudinal Educational Outcomes dataset combines HRMC earnings data with student records from the Higher Education Statistics Agency.
While there are lots of factors at play when it comes to your future earnings, use this as a rough timeline of what graduates in this subject area were earning on average one, three and five years later. Can you see a steady increase in salary, or did grads need some experience under their belt before seeing a nice bump up in their pay packet?
Have a question about this info? Learn more here